window tints Select a Beginning Point

window tints

It is recommended to only apply a tiny portion of paint finish (approximately 2 ft. by 2 ft.). window tints Pick any point that is in front, like the front left or front right to start. Continue working in a circular fashion and work through each section until you reach the final. Spray the Lubricant Make sure you have your clay bar lubricant and spray a large amount onto the surface of your car. The lubricant can't damage your car's surface, www.vinylcarwrapshop.com but the clay bar can, so more is better in this case. Clay the Vehicle After your car's paint has been thoroughly lubricated, window tints take the synthetic clay bar or mitt and rub it lightly across the surface. It should feel like the delicate clay mitt or bar picking off pieces and fragments off the paint's surface. window tints christchurch window tints Continue moving the clay bar or mitt in a forward and backward direction across the car until you feel the level of grip start to reduce. You can add more lubricant as needed. Check Your Work When you've completed each section, make sure to use the bag test mentioned above for that section to be sure that you're finished. Make sure to do this after each section before continuing to the next section to ensure you don't get way ahead of yourself.

Cleanse, Wash and dry the vehicle When the clay bar treatment kit or mitt is finished, I would recommend cleaning your car with a top-quality pH neutral car shampoo. Clay lubricant spray consists of concentrated car shampoo, window tints which is dilute at 4 to 1. This will result in lots of soap residues on your car's surface. As a precautionary measure make sure you complete an entire two-bucket-method car wash. This will ensure that any leftovers have been removed from the car's surface. Not Confident in DIY Clay Bar Treatment - Consider a Professional Auto Salon While it seems easy enough it's not for all. Barring made of clay can result in damage to the vehicle's clear coating as well as other materials in the event that you are using too much lubricant or a clay disc with an unnatural texture.