car vinyl wraps Choose a starting point

car vinyl wraps

It is best to apply a tiny portion of paint finish (approximately 2 feet. by 2 ft.). Choose any location that is in front, like the left front or front right to start. car vinyl wraps You will go through section by section in a circular manner until you reach the same spot. Spray the Lubricant Make sure you have your clay bar lubricant and spray it on the car's surface. The lubricant can't damage the surface of your car, but the clay bar can, so more is better in this instance. Clay the vehicle After your car's paint has been completely lubricated, car vinyl wraps grab the synthetic clay mitt or bar and rub it lightly across the surface. www.vinylcarwrapshop.com It should feel like the fine clay bar or mitt grabbing/picking off pieces and fragments off the paint's surface. car vinyl wraps Continue moving the mitt or clay bar both forward and backwards across the car until the grip begins to decrease. If necessary you need to add additional lubricant.

Make Sure You've Checked Your Work To make sure you're finished with each section, make sure you do the bag test for that section. car vinyl wraps It is important to complete this following each section prior to moving on to the next section, to make sure you don't go too far ahead of yourself. Rinse and Wash the Vehicle When the clay bar treatment or mitt is finished, car vinyl wraps I would recommend washing your car with a high-quality pH neutral car shampoo. vinyl wraps near me The clay lubricant spray comprises concentrated car shampoo, car vinyl wraps which is dispersed to 4:1. This will result in a lot of soap residue on your vehicle's surface. As a precautionary measure ensure you have completed an entire two-bucket-method car wash. car vinyl wraps This will ensure any leftovers have been removed from the car's surface. Are you unsure about DIY clay bar treatment Do you think about using a professional auto salon Clay barring might seem easy enough but it is not suitable for all. In fact, if you don't use enough lubricant, car vinyl wraps or a clay disc which is too rough, it's easy to damage the clear coating of the paint on your vehicle and other materials while trying to get rid of surface contaminants.